Monday, August 13, 2007

taking on the DDM arm

Here's a picture of the DDM arm and deposition tip. My next step is to rebuild the arm portion. Notice that I am starting with the parts that are similar to what I've built before?

Same steps here, just delete the deposition tip and see what I can see:

This is the arm displayed in the tubes view. Right away I picked out six pieces, thinking that a single piece could be used as a moiety. This piece to be exact:

And if you extrude this, and manually bond the bottom carbons, you get the ring back:

Mine still looks a little loose because it has not had the energy minimized yet. But I'm on the right track.

MTF

Sunday, August 12, 2007

I was wrong...this was the easy part

There is an inner ring that sits inside the outer one I just built. This creates a bushing mechanism.

Here is a pic of the original nested in the outer ring:

See it?

Here is just the inner ring displayed in tubes view:

This diamondoid ring looks familiar. I know because I have already spent an hour taking it apart to build Damian's carbon nanotube bearing. This is a good lesson: Don't feel like you have to reinvent the wheel. If you get something that works, keep using it. A slightly less talked about, but equally valuable, lesson is: Never throw anything away.

I just happen to have a copy of the ring moiety laying around here:

Extruding this one gives a ring like the original:

Mine is on the left; or is it on the right? Hmmm. Just kidding. What? Have you heard that one before?

Putting them together:

Beautiful. However I might need to go back and extrude the outer ring to 25 instead of 24. It looks a little tight. I guess I could actually measure Damian's ring's diameter. We'll see.

I am now really sure that was the easy part.

MTF

building the outer ring on the DDM

As my good friend Dr. G used to say before beginning a new lecture, " a modicum of review":

I was in the midsts of rebuilding Damian's DM, starting with the outer ring on the deposition arm, and trying to piece out a moiety I could use to build a new ring.

I settled on this one:

This would not produce an exact copy of the original ring because of the differing locations of the oxygen atoms around the circumference. However I now believe this one will work.

To arrive at this conclusion I built another copy of this moiety from scratch and bonded it to the one above in the plane that goes into the screen you are reading this on. You can imagine that the moiety in the above picture is the keystone of an arch with the rest of the arch branching out and downwards to the left and right. These arches would connect to form the ring. I have doubled the thickness of this moiety.

(Big Time Review: for the purposes of this site we are calling the smallest repeating pattern of a part a moiety)

I got this:

This would be rotated 90 degrees from the above picture, so we are looking into the cross section of the ring.

Extruding this 24 times as a ring produces something pretty close to the original:

Mine is on the left; or is it on the right? Hmmm. Just kidding. You can see by the placement of the oxygen that the new ring is the one on the left.

Alright, that was probably the easy part.

MTF

Saturday, August 11, 2007

a little more messing with the DDM


Here I am carving up Damian's ring to try to find a potential moiety.

This could be one. Let's see what happens if this moiety is extruded 18 times in a ring formation:

The resulting ring is one on the right and Damian's original is on the left. It's not exact, but that was expected. I don't know yet if I can use it to make a final ring for the DDM. If I can, then I will have to go back and build the moiety from scratch one atom at a time to reform the ring, just for my own sense of satisfaction.

MTF

messing around with Damian's deposition mechanism (DDM)

I planned on using the same basic approach to recreate this one as I have with others, one piece at a time, and small pieces at that. I decided to start with the outer ring, so I needed to isolate it. The entire part was sent as a protein databank file, so it is all one chunk. I need to delete everything not part of the ring:

Here I am removing everything else. Next I try to find a symmetry or some basic pattern I can start with:

Orientating the ring this way it appears that maybe there are two similar rings joined together. The middle seems to resemble a type of seam to me. I figure I can cut the ring in half, reverse-engineer one half and join two together to recreate this part. I deleted all the atoms left of the seam, leaving the red oxygens:

Here is one half of the ring with the oxygens displayed in CPK view. If you look closely you'll see there is not a perfect pattern for the locations of the oxygen atoms. Damian said this was built before NE1 and its extrude function. This means I cannot piece-out a single moiety and extrude it to get this exact ring. Unfortunately I don't have the patience (and probably skill!) to build a ring like this without using the extrude function. <- That's sort of the way I do these: piece out the moiety and extrude it, just like with carbon nanotube bearing. I am going to have to deviate from the original design, hopefully the changes will be immaterial.

Thursday, August 9, 2007

general update

Here is the current status of things at Machine Phase:

  • I am still thinking of what original project I want to tackle next and open to suggestions.
  • The C60 pump isn't dead yet, just mostly dead, so partially alive.
  • My sim-computer is now free, but I am hesitant to start a crazy long simulation on the octet truss until I am sure I won't need it for the pump. Also I am still considering the best way to simulate it.
  • This might be my favorite structure in Damian's gallery, not least because there is a lot to it I don't really know how to build. Plus I just think it looks great. I would say it is the Grand National of the gallery. <- a vague comparison but a compliment none the less.
And look what I got in my inbox yesterday:


For now I think I am going to spend a few hours taking this apart and putting it back together again and showing you how too. Just in case you are wondering, I got Damian's blessing for this series of posts.

Addendum: OR maybe it is time to look at some of the stuff NE1 can do with DNA?
I'll sleep on it...

Tuesday, August 7, 2007

still here, some bad news on the C60 pump, and copying Damian...again


Well after around 400 hours all we got was a wobbly tube. It looks like the cnt paddle might be too flimsy for this design as it just slips past the fullerenes. The good news is everything held together, so I could probably build a SiC bar rotor and really turn up the juice (slang for increasing the rotor speed and torque).

This is the first long simulation I have done in the Alpha 9 release. A while ago Damian filled me in on some of the improvements the simulator underwent between Alpha 8 and 9. There were five areas addressed, but I believe the one most relevant to the pump and nanotube systems used here were extending the parameters used to calculate graphic systems. These were made more rigorous. This may explain why the C60 survived the crash tests so well, but kept breaking apart in the pump.

Also remember when I tried calculating the modulus of rigidity and Young's modulus of a carbon nanotube and they didn't come out right? Well, those were done in A8 with old parameters, so I should probably redo them in A9.

Other than that I have been benchmarking Damian again. What is it they say about good and great artists, something about copying and stealing? I have been trying to recreate his carbon nanotube crimped junction. So far mine is different because the tubes are bonded to the rings. From what I can tell from Damian's site, his tubes are not. I have built a ring that is not connected to the tubes by placing nitrogen around the inner circumference, but this is not like Damian's either. I am sure he would probably just send me his to figure out, but this is kind of fun. In NE1 if you have a scroll wheel on your mouse, you can press it and freely rotate the view of a part. I don't know how many times I will be squinting at some picture in Damian's gallery and push the scroll button down to try and rotate the view.

Here is mine thus far:

And my ring that's not right:


I am still wrapping up my other project. I will punch back in full-time soon.